Can I Use 2 RAM Sticks At Different Speeds?

Can I use all 4 RAM slots?

A common misconception about RAM is that you can put any RAM into any slot.

You can do that, but it won’t work, or it will work ineffectively.

If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results..

Is it OK to mix Ram brands?

Mixing Ram Brands If you are going to buy new RAM, you can mix RAM brands. However, it will make your life easier if you buy the exact same type of RAM. You won’t have to do anything new and you aren’t putting your machine at as much of a risk.

Can I install RAM with different frequency?

You can’t add RAM of different sizes (frequencies/models/etc.) … If you install two RAM sticks of different frequencies, both of them will be working on the lowest frequency. So, if you Installed one stick with 1600Mhz and other with 2400Mhz, the latter will work on 1600Mhz, thus lowering its efficiency.

Can you add 8gb RAM to 4gb?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

How can I tell if my RAM is dual channel?

Your ram is dual channel if it is put in the right slots. You know it by reading the user’s manual of your motherboard. Some motherboards, but it’s rarer, recommend using A1 and B1 slots first. Keep in mind, it is best to use ram of the same brand and same speed.

Do all 4 sticks of RAM have to be the same?

You can even mix sticks although not recommended and a higher chance for the ram not playing nice together. Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Is 128gb RAM overkill?

Buy 128GB only if you want to run heavy Software and heavy games simultaneously. Except that 128GB is kind waste of Money. Further the cost of 128 GB stick is higher than core i5 processor. Go for Better GPU with more than decent amount of RAM.

Which RAM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Is it better to have 1 or 2 sticks of RAM?

Dual channel is nice, but when working in small cases, you would only have 2 slots most of the time for RAM. So, it more or less is dependent on what your system can hold. If it can hold four sticks, then go with the two RAM sticks. If not,go for the single stick.

Is 2 8gb RAM better than 16gb?

Depends on how many slots you have on the motherboard. If you have 2 slots, a single 16gb is better,since you can upgrade in the future easier. If you have 4 slots or you don’t plan to ever upgrade, 2x8gb is better since that is faster and will increase the performance of your pc.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Is 3 sticks of RAM bad?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Is it better to have 4 sticks of RAM or 2?

memory overclocking is harder the more sticks you have. since extra sticks mean more strain on the memory controller. But performance wise, the is no disadvantage or advantage between 2 or 4 sticks on any consumer platform other than socket 1366 which is triple channel, and socket 2011 which is quad channel.

Is 24gb RAM overkill?

24GB is just overkill. Also consider your current setup, hopefully you aren’t using a single 8GB stick. However if you are, toss it and put in the 2x8GB matched set for dual channel mode and increased performance.

Can I use 1333mhz and 1600MHz RAM together?

2 Answers. Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Why does my 1600mhz RAM shows 1333mhz?

You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.

Can I use 2 4gb and 2 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.

Is 32gb RAM overkill 2020?

In all honesty, 32GB of RAM is overkill for a lot of use cases, though it’s becoming more and more common. It’s venturing into RAM that a beginner Server needs but, on the other hand, it does future-proof one part of your PC. And being able to overclock the RAM only adds to this.

How do I know what kind of RAM to buy?

Your computer’s motherboard will also determine RAM capacity, as it has a limited number of dual in-line memory module slots (DIMM slots) which is where you plug in the RAM. Consult your computer or motherboard manual to find this information. Additionally, the motherboard determines what kind of RAM you should pick.

Can I use 2 Rams with different MHz?

Only If your motherboard supports the MHz of ram you want to use. But note that pc will take in account the speed of the lowest MHz.. like for eg you have 2 ram sticks of one 2400mhz and another one 2133mhz.. then your computer will automatically lower your ram speed from 2400mhz to 2133mhz.

Can I use two different brands of RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well. So yes. Different brands of Ram are fine to use together.